Manual gearbox oil change

Power train FWD

oil
Nissan
6 gears
box type: RS6F95R
API GL4 75W80
service refill quantity (L): 1.7

drain

draining / filling

Checking conditions :
  • Hot engine (after one engagement of the motor-driven fan).

fill-up

Clean the refill/level and drainage caps.

Install :
  • Oil change 2 cap.
  • With a new gasket.

Tighten at 2.3 daN.m torque.

Fill-up the gearbox.

The gear box oil level is adequate when reaching and not superseding the lower edge of the filling hole (vehicle lying on flat ground).

Install :
  • Oil fill-up cap of the gearbox 1.
  • With a new gasket.

Tighten at 0.2 daN.m torque.

Put back :
  • The motor’s lower protecting cover (if pertinent).

Lower the vehicle.

AWD

oil
Nissan
6 gears
box type: RS6F52A
API GL4 75W80
service refill quantity (L): 1.7

drain

draining / filling

Checking conditions :
  • Hot engine (after one engagement of the motor-driven fan).

fill-up

Clean the refill/level and drainage caps.

Install :
  • Oil change A cap.
  • With a new gasket.

Tighten at 3.0 -> 3.5 daN.m torque.

Fill-up the gearbox.

Check the fluid level.

Install :
  • Oil fill-up cap of the gearbox B.
  • With a new gasket.

Tighten at 3.0 -> 3.5 daN.m torque.

Put back :
  • The motor’s lower protecting cover (if pertinent).

Lower the vehicle.

oil level check

==> frontwards.

Remove :
  • Oil level and fill-up cap of the gearbox B.

For checking, make yourself a purpose tool G (for example with a weld stud) as shown on the drawing.

C gauge oil level G.

Ref : 2.5 i16v 87 +/- 3 mm.

Ref : 2.0 dCi 90 +/- 3 mm.

Install :
  • Oil level and fill-up cap of the gearbox B.
  • With a new gasket.
  • Tighten at 3.5 daN.m torque.

© Fluxea 2019